山东悦龙橡塑科技有限公司

　　山东悦龙橡塑科技有限公司生产的海洋漂浮软管
　　应用：海洋漂浮软管是浮式储油轮（ FPSO）上外输系统的长线关键设备，用于运输的原油和石油产品，是FPSO生产管理中不可或缺的重要装备。
　　1、内衬由合成橡胶制成，作为内流体围壁，阻止流体外溢。
　　2、加强层由尼龙帘线、聚酯帘线、钢丝帘线等材料制成，提高软管抗拉强度。
　　3、缠绕钢丝加强层由高强度碳钢钢丝制成，来提高软管的整体性，保证软管耐负压性能。
　　4、漂浮层是采用不吸水、弯曲不断裂的微孔发泡漂浮材料制成，使软管具有漂浮性能。
　　5、外层是采用耐老化、耐磨、耐油、耐海水腐蚀的合成橡胶或聚氨酯材料制成，保护软管不受损坏。
　　内径尺寸范围：   6″~ 24″(152mm ~ 600mm)
　　软管最大长度:     40′（12.2m）
　　设计工作压力：   1.5 Mpa
　　设计爆破压力：   7.5 Mpa
　　使用环境温度：   -29~52℃
　　输送液体温度：   -20~82℃
　　最大设计流速：    21m/s
　　芳香烃最大含量： 60%
　　最小弯曲半径：    4倍或6倍的公称内径
　　软管漂浮性能：    25%
　　Application: Ocean rafting hose, is the FPSO (FPSO) on the transportation system of long-line key equipment, is a crude is the only channel, FPSO production management indispensable equipment.
　　1. made from synthetic rubber lining, as in the fluid surrounding wall, blocked fluid leakage.
　　2. strengthening layer consists of nylon cord, polyester cord, steel cord materials, undertaking from its own weight and end load, increasing hose tensile strength.
　　3, winding wire reinforcing layer consists of high-strength carbon steel wire, to improve the integrity of the hose, guarantee the hose tensile properties and resistance to negative performance.
　　4, floating layer is foaming floating material, so that the hose with floating performance, non-absorbent, bending not fracture characteristics.
　　5. the outer shell is adopted, wear resistant, corrosion of synthetic rubber or polyurethane materials, protection of floating material is not damaged,
　　Bore size range: 2”~ 20”
　　Hose maximum length 10.67m
　　Design working pressure 1.5 Mpa
　　Design burst pressure of 7.5 Mpa
　　Ambient temperature -29 ~ 52 ℃
　　Transmission fluid temperature -20 ~ 82 ℃
　　Maximum design flow rate of 21m / s
　　60% of the maximum content of aromatic
　　4 times the minimum bend radius or 6 times the nominal diameter
　　25% of floating hose performance